SHOWER MIXER
PVP: 147,00 € including VAT and delivery
Thermostatic mixer
With these collections we wanted to be loyal to our company philosophy, ie be quite irreverent and differentiating with respect to forms and concepts, and be aware that saving energy and water should not be an addition but a necessity. For this reason our toilet and bidet faucets loaded in series, reducing flow aerators, they can provide savings in excess of 50% in water consumption, but in its use to appreciate this property.
INSTALLATION TIPS
The water supply hoses are designed to connect to the faucet without using any key, this mount should be performed by hand, only to be hidden by screwing up the O-ring in its housing. The use of torque wrenches or additional sealing elements will cause over-tightening and breakage of the O-ring, which can cause leaks.
IMPORTANT: Make sure you connect the hoses in their seats for the cold water in the right bed and hot water in the housing on the left, not any thread which is the subject hose faucet.
We suggest that the taps are installed on keys always control. Just as in hard water conditions or drag of impurities, these filters are installed, preventing these impurities from reaching the control mechanisms.
The sanitary fittings are estimated to run perfectly with pressures to 10 bar, however the optimum operating pressure is between 2 and 4 bar. We recommend therefore for reasons of saving water, pressure is adjusted to optimum range.
MAINTENANCE OF THE FAUCET
To maintain the appearance of the faucet, we recommend that cleaning is not used in any case abrasives or scouring pads that can scratch the surface decoration. The fact dry tap after use with a towel or soft cloth, avoid calcareous deposition on the surface, thus prolonging the original look of the faucet. However, if the tap should be cleaned using a mild soap, rinse with water and dry with a soft cloth. We recommend using anti-lime products in the market, only against dirt persistently and systematically.
It is possible that, faced with hard water or drag of impurities, gradually clogged aerators. We recommend removing them, you begin to notice a decrease in normal flow. To clean these items, simply dip these aerators in a 50% solution of vinegar and water for 5 / 6 hours. This simple operation will clean the aerator perfectly normal use.
10 YEAR WARRANTY
DELIVERY: 10 DAYS
